toilets

Toilet Rebates End December 31, 2018

As we enter waste water averaging season (November through February), we are all trying to use the least amount of water possible so that our waste water averages and charges will be lower next year. So, let’s talk toilets as an easy way to reduce the consumption of water inside your home. It involves no behavior changes, you don’t have to think about it, it just saves water each time it’s used (which is every day).

You have a direct impact on your waste water charges by using less water during the winter months. First, turn off your irrigation system. Easy, done. The next major impact–and my topic today–toilets. Everyone uses one every day. They account for the greatest use of water indoors, using up to 30% of our indoor water use. The less water you flush, the lower your water use will be, and that directly impacts waste water charges. We’ve come full-circle now!

Now, the City has had a toilet rebate program, on and off, since 2009. To qualify for the rebate there are three criteria:

1. You must be a direct City of Round Rock water customer. This is because the water conservation program is funded directly by a portion our customer’s water charges; MUDs and others not on City water do not contribute to the program and aren’t eligible.

2. Your house or property must have been built before January 2006. Here’s why that date is there: In 1991 the EPA determined that all toilets manufactured and sold in the U.S. must use 1.6 gallons of water per flush (gpf) or less. At that time, all the manufacturers did was fill up the tanks with less water but kept all the plumbing parts the same. The toilets were terrible and most had to be double-flushed, which is why the bad reputation of “low-flow” toilets.

So, fast-forward a few years to 1996 and efficient toilets were redesigned and now actually flushing the way they were supposed to. Around 2005, toilets underwent another generational change and dual flush toilets were introduced, as well as those using less than 1.6 gpf. That’s where we stand with the date. However, not all toilets are the same, which leads us to #3.

3. The toilet(s) purchased must be WaterSense approved. WaterSense is an EPA program that is basically like ENERGY STAR, but for water use. Items labeled “WaterSense” have been third-party tested for performance and lasting efficiency. When purchasing a product that has the WaterSense logo, you know the product will perform as expected and will retain its water savings for its life expectancy. The list is continually updated as more products get tested.

If you haven’t already participated in the rebate program to replace your pre-2006 toilets, it’s time to do it!! The rebate program is ending permanently on December 31, 2018, so there is only a month left to take advantage of the rebate!

Why is it ending, you ask? Well, starting January 1, 2014, ALL toilets sold in Texas must use 1.28 gpf or less, per the Texas Plumbing Code. You really have no choice but to purchase an efficient toilet; so, we’d like to start using the toilet funds for another program.

Toilet Rebate Program Returns!

watersense toiletI wrote a blog back in November 2013 about the toilet rebate program ending and why it was ending.  In case you missed it, it was due to the State Plumbing Code changes that as of January 1, 2014, mandated that all toilets sold in the State of Texas must use 1.28 gallons of water per flush (gpf) or less.  That’s down from the previous requirement of 1.6 gpf, so it’s a small savings of water per flush, which can add up significantly depending on the number of people in the house or how many hours per day the house is occupied and the toilets are being used.

The happy news is that I get to announce now, that the efficient toilet rebate program been updated and funded, so it is now available again; you can participate as soon as you’re reading this!  The changes are pretty minimal–only the age of the house has changed.  With the new program, the house (or any property) .  The reason the date was changed to 2006 is because during the late 1990s and early 2000s the 1.6 gpf toilet was the most efficient toilet on the market, thanks to the previously mentioned laws.  Starting around 2004, 1.28 gpf toilets started making an appearance and have since grown to nearly take over the market.  Homes that were built in the time period of the late 90s – early 2000s can now get a little more efficient with their indoor water use.  That’s good!

Other program details are the same:   Logo-WaterSense

    • Property must be a DIRECT water customer of the City of Round Rock (sorry, no MUD customers);
    • New toilet(s) must be from the EPA’s WaterSense list, which are simple to locate in stores or on product packaging by looking for the WaterSense emblem (shown at right);
    • There is no limit on the number of toilets at a residence, simply one for one replacement.
    •  
      Maximum rebate is $100 per toilet.
    • House or Property must be built prior to January 1, 2006.

Find the full details on the City’s Water Conservation Rebate page.

The “catch”, if there has to be one, is that if you’ve already replaced a toilet (or more) in the previous toilet rebate program, you aren’t eligible to replace that same toilet again under this program.  Now let’s start replacing those old toilets!

Best Seat in the House

As we’ve entered into wastewater averaging season (November – February), we are all trying to use the least amount of water possible so that our wastewater averages and charges will be lower this next year.  So, let’s talk toilets as a easy way to reduce the consumption of water inside your home.funny toilet  It involves no behavior changes, you don’t have to think about it, it just saves water each time it’s used!  First though, maybe I should explain wastewater averaging quickly, to make sure we’re all on the same page.

Wastewater averaging happens every winter.  It’s the way the City calculates what you’ll be charged on your utility bill for wastewater (or sewer, same thing).  The City doesn’t have meters on the wastewater lines coming from your property, so we don’t know exactly how much waste is leaving and we’re treating.  We make assumptions based on your water use.  During the winter months (November – February), it is assumed that all water used at your property is being used indoors (and goind down the drain–think sinks, toilets, baths, washers, showers).  It’s winter, the plants go dormant and we’ve had so much rain, no additional irrigation is needed.  Evaporation to pools is minimal.  So, this winter water use is the lowest amount of water used all year.  Those winter months of water use are averaged and that average is what you’re charged for wastewater the remainder of the year.  And yes, wastewater does cost more than water.  It just takes more time, chemicals, and other treatments to clean it, so the charges are slightly higher for it.

You have a direct impact on your wastewater charges by using less water during the winter months.  First, turn off your irrigation system.  Easy, done.  The next major impact–and my topic today–toilets.  Everyone uses one everyday.  They account for the largest use of water indoors, using up to 30% of our indoor water use.  The less water you flush, the lower your water use will be, and that directly impacts wastewater charges.  We’ve come full-circle now!

Now, the City has had a toilet rebate program, on and off, since 2009.  To be eligible for the rebate there are three criteria:Logo-WaterSense

  1. You must be a direct City of Round Rock water customer.  This is because the water conservation program is funded directly by a portion our customer’s water charges; MUDs and others not on City water do not contribute to the program and aren’t eligible.
  2. Your house or property must have been built before January 1996.  I get asked about that date and here’s why it’s there: In 1991 the EPA determined that all toilets manufactured and sold in the U.S. must use 1.6 gallons of water per flush (gpf) or less.  At that time, all the manufacturers did was fill up the tanks with less water, but kept all the plumbing parts the same.  The toilets were terrible and most had to be double-flushed, which is why the bad reputation is still made fun of today in sitcoms.  Water usage was actually increasing, rather than decreasing and the manufacturers knew they had to make other changes to the design of the toilets.  So, fast-forward a few years to 1995 and efficient toilets were redisgned and now actually flushing the way they were supposed to.  The date is there since all toilets manufactured since then were good, working 1.6 gpf toilets.
  3. The toilet(s) purchased must be WaterSense approved.  WaterSense is an EPA program that is basically like Energy Star, but for water use.  Items labeled with WaterSense label have been third-party tested for performance and lasting efficiency.  When purchasing a product that has the WaterSense logo, you know the product is good and will retain it’s water savings for it’s life expectancy.  The list is continually updated as more products get tested.

So, if you haven’t already paricipated in the rebate program, or replaced your pre-1996 toilets, it’s time to do it!!  The rebate program is ending permanently on December 31, 2013, so there is only a month left to take advantage of the rebate!  Why is it ending, you ask?  Well, starting January 1, 2014, all toilets sold in Texas must be 1.28 gpf or less, by law.  The City isn’t keen on providing a rebate on an appliance that is efficient, when that’s the only choice available. We’d rather start using the funds for another program.